BODY 

1. TeamQik Zer0-Mod Bandit Wingless Sprint Body

2. Lexan or 3D printed body panels may be used

​

CHASSIS

1.Traxxas 2WD Bandit chassis only.

2. Electronics must be installed within chassis surface and secured.

​

BEARINGS

1. Bandit bushings may be replaced with bearings

2. Slash bearing carriers may be installed to allow larger bearings (5x11x4) to be used.

​

SERVO

1. Traxxas (TRA2075) Servo is allowed

2. TRA2075X servo and TRA2072X gears are allowed as “alternative” parts servo

​

BATTERY

1. 2cell 7.4v LiPo battery with a maximum of 5200mah and 50c

2. External plug only no “Bullet Type” connectors

​

ADJUSTMENTS

1. TRAXXAS76/83/86/90 spur with all transmission parts in place (slipper)

2. Any pinion size

3. No modifications to transmission case

4. The gear cover is required

5. Traxxas grey and black hex hubs may be used in any combination

6. Transmission functionality rule(motor cannot spin while slowly turning 1 rear wheel a full turn.)

7. Traxxas Steel transmission gears only(internal plastic transmission gears not allowed)

8. Adding weight (in anyway) is not allowed.

​

SUSPENSION

1. TRAXXAS 2WD plastic shocks only(grey or black)(fronts in front,rears in rear)

2. Original Bandit Springs only TRA2458 and TRA2457

3. The shock’s travel may be limited by using internal shims.

4. Original shafts in original cylinder (Length and type in proper cylinder)

5. Original pistons from kit only(1,2or3hole)no modifications may be made

​

MOTOR

1. Traxxas 12T Titan Brushed Motor with XL5 ESC.

2. OEM motor connectors only

3. ESC Must be mounted on stock plate

​

TIRES/WHEELS

1. Hex adapters may be installed.

2. Stock Bandit wheels and tires

3. Traxxas Anacondas

4. Pro-Line Hoosiers

5. DE Gambler Sprint Wheels and OutlawTires